/*+headerPackage+*/ /**############################################################################**/ /* */ /* Copyright Bartosz Jablonski, since July 2019 onward. */ /* */ /* Code is free and open source. If you want - you can use it. */ /* I tested it the best I could */ /* but it comes with absolutely no warranty whatsoever. */ /* If you cause any damage or something - it will be your own fault. */ /* You have been warned! You are using it on your own risk. */ /* However, if you decide to use it do not forget to mention author: */ /* Bartosz Jablonski (yabwon@gmail.com) */ /* */ /* Here is the official version: */ /* Copyright (c) 2019 - 2026 Bartosz Jablonski (yabwon@gmail.com) Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ /**#############################################################################**/ /*** HELP START ***/ /* SPF (SAS Packages Framework) is a set of macros: - to install, - to load, - to get help, - to unload, or - to generate SAS packages. SAS Packages Framework, version 20260615. See examples below. A SAS package is a zip file containing a group of files with SAS code (macros, functions, data steps generating data, etc.) wrapped up together and %INCLUDEed by a single load.sas file (also embedded inside the zip). Contributors: - Stu Sztukowski LinkedIn: https://www.linkedin.com/in/statsguy/ GitHub: https://github.com/stu-code - Ken Nakamatsu LinkedIn: https://www.linkedin.com/in/k-nkmt GitHub: https://github.com/k-nkmt */ /*** HELP END ***/ /*+splitCodeForPackage+*/ /*** HELP START ***/ %macro splitCodeForPackage( codeFile /* a code file to split */ ,packagePath= /* location for results */ ,debug=0 /* technical parameter */ ,nobs=0 /* technical parameter */ ) /*** HELP END ***/ / des = 'Utility macro to split "one big" code into multiple files for a SAS package, version 20260615. Run %splitCodeForPackage(HELP) for help info.' ; %if (%superq(codeFile) = ) OR (%qupcase(&codeFile.) = HELP) %then %do; %local options_tmp ; %let options_tmp = ls=%sysfunc(getoption(ls)) ps=%sysfunc(getoption(ps)) %sysfunc(getoption(notes)) %sysfunc(getoption(source)) msglevel=%sysfunc(getoption(msglevel)) ; options NOnotes NOsource ls=MAX ps=MAX msglevel=N; %put ; %put #################################################################################; %put ### This is short help information for the `splitCodeForPackage` macro #; %put #-------------------------------------------------------------------------------#; %put # #; %put # Utility macro to *split* single file with SAS package code into multiple #; %put # files with separate snippets, version `20260615` #; %put # #; %put # A SAS package is a zip file containing a group #; %put # of SAS codes (macros, functions, data steps generating #; %put # data, etc.) wrapped up together and included by #; %put # a single `load.sas` file (also embedded inside the zip). #; %put # #; %put # The `%nrstr(%%splitCodeForPackage())` macro takes a file with SAS code #; %put # snippets surrounded by `%str(/)*##$##-code-block-start-##$## *%str(/)` and #; %put # `%str(/)*##$##-code-block-end-##$## *%str(/)` tags and split that file into #; %put # multiple files and directories according to a tag specification. #; %put # #; %put # The `` is a list of pairs of the form: `type(object)` that #; %put # indicates how the file should be split. See example 1 below for details. #; %put # #; %put #-------------------------------------------------------------------------------#; %put #### Parameters: #; %put # #; %put # 1. `codeFile=` *Required.* Name of a file containing code #; %put # that will be split. Required and not null. #; %put # If empty displays this help information. #; %put # #; %put # - `packagePath=` *Required.* Location for package files after #; %put # splitting into separate files and directories. #; %put # If missing or not exist then `WORK` is used. #; %put # #; %put # - `debug=` *Optional.* Turns on code printing for debugging. #; %put # #; %put # - `nobs=` *Optional.* Technical parameter with value `0`. #; %put # Do not change. #; %put # #; %put #-------------------------------------------------------------------------------#; %put # #; %put # Visit: `https://github.com/yabwon/SAS_PACKAGES/tree/main/SPF/Documentation` #; %put # to learn more. #; %put # Tutorials available at: `https://github.com/yabwon/HoW-SASPackages` #; %put # #; %put ### Example 1 ###################################################################; %put # #; %put # Assume that the `myPackageCode.sas` file #; %put # is located in the `C:/lazy/` folder and #; %put # contain the following code and tags: #; %put ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~sas; %put ; %put %nrstr( /)%nrstr(*##$##-code-block-start-##$## 01_macro(abc) */ ); %put %nrstr( %%)%nrstr(macro abc(); ); %put %nrstr( %%put I am "abc".; ); %put %nrstr( %%)%nrstr(mend abc; ); %put %nrstr( /)%nrstr(*##$##-code-block-end-##$## 01_macro(abc) */ ); %put ; %put %nrstr( /)%nrstr(*##$##-code-block-start-##$## 01_macro(efg) */ ); %put %nrstr( %%)%nrstr(macro efg(); ); %put %nrstr( %%put I am "efg".; ); %put %nrstr( %%)%nrstr(mend efg; ); %put %nrstr( /)%nrstr(*##$##-code-block-end-##$## 01_macro(efg) */ ); %put ; %put %nrstr( proc FCMP outlib=work.f.p; ); %put %nrstr( /)%nrstr(*##$##-code-block-start-##$## 02_functions(xyz) */ ); %put %nrstr( function xyz(n); ); %put %nrstr( return(n**2 + n + 1) ); %put %nrstr( endfunc; ); %put %nrstr( /)%nrstr(*##$##-code-block-end-##$## 02_functions(xyz) */ ); %put %nrstr( quit; ); %put ; %put ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~; %put # #; %put # and we want results in `C:/split/` folder, we run the following: #; %put ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~sas; %put %nrstr( filename packages "C:/SAS_PACKAGES"; %%* setup a directory for packages;); %put %nrstr( %%include packages(SPFinit.sas); %%* enable the framework; ); %put ; %put %nrstr( %%splitCodeForPackage%( ); %put %nrstr( codeFile=C:/lazy/myPackageCode.sas ); %put %nrstr( ,packagePath=C:/split/ %) ); %put ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~; %put # #; %put #################################################################################; %put ; options &options_tmp.; %GOTO ENDofsplitCodeForPackage; %end; %local options_tmp2 ; %let options_tmp2 = ls=%sysfunc(getoption(ls)) ps=%sysfunc(getoption(ps)) %sysfunc(getoption(notes)) %sysfunc(getoption(source)) msglevel=%sysfunc(getoption(msglevel)) ; options nomprint nosymbolgen nomlogic notes source ls=MAX ps=MAX msglevel=N ; %let debug = %sysevalf(NOT(0=%superq(debug))); %if 1=&debug. %then %do; options mprint symbolgen mlogic source source2 msglevel=i; %end; %put NOTE- --&SYSMACRONAME.-START--; %local rc; %let rc = %sysfunc(doSubL(%nrstr( options %sysfunc(ifc(1=&debug. ,msglevel=I ls=max ps=64 notes mprint symbolgen mlogic source source2 ,msglevel=N ls=max ps=64 nonotes nomprint nosymbolgen nomlogic nosource nosource2 )) ;;;; options DLcreateDir; libname w "%sysfunc(pathname(WORK))/_splitCodeForPackage_"; filename d "%sysfunc(pathname(WORK))/_splitCodeForPackage_/dummy"; data _null_; file d; put "dummy"; run; data _null_; length codeFile $ 4096; codeFile = symget('codeFile'); codeFile = dequote(codeFile); if fileexist(codeFile) then do; codeFile = quote(strip(codeFile),"'"); call symputX("codeFile",codeFile,"L"); end; else do; put "ERROR: [splitCodeForPackage] File " codeFile 'does not exist!'; call symputX("codeFile",quote(strip(pathname('d'))),"L"); end; run; options notes; filename source &codeFile.; filename source LIST; options nonotes; data _null_; length packagePath work $ 4096; work = pathname('WORK'); packagePath = coalescec(symget('packagePath'), work); rc = fileexist(packagePath); if NOT rc then packagePath = work; if rc = 1 then put "INFO: " @; else put "WARNING: " @; put packagePath=; call symputX('packagePath',packagePath,"L"); run; data w.files; stop; run; data _null_; if 1 = _N_ then do; declare hash H(ordered:"A"); H.defineKey('token'); H.defineData('token','start','end','lineNumber'); H.defineDone(); end; if 1 = _E_ then do; H.output(dataset:'w.files'); end; infile source END=_E_; lineNumberN+1; input; length line $ 4096 lineNumber $ 256; line = left(lowcase(_infile_)); block=scan(line,1," "); if block in ( '/*##$##-code-block-start-##$##' '/*##$##-code-block-end-##$##' ); if substr(block,20,1) = 's' then do; s=1; e=0; end; else do; s=0; e=1; end; i=1; token=block; do while(i); i+1; token=scan(line,i," "); if token='*/' OR token=' ' then i=0; else do; start=0; end=0; if H.find() then do; start=s; end =e; lineNumber = cats(lineNumberN); end; else do; start+s; end +e; lineNumber = catx(",",lineNumber,lineNumberN); end; H.replace(); /*putlog token= s= e= start= end=;*/ end; end; run; title; title1 "Attention!!! Not Matching Tags!"; title2 "Verify following tags in file:"; title3 &codeFile.; proc print data=w.files(where=(start NE end)); run; title; data w.files; set w.files end=_E_ nobs=nobs; where start=end; length dir $ 128 code $ 32 path $ 160; dir =coalescec(scan(token,1,'()'),'!BAD_DIRECTORY'); code=coalescec(scan(token,2,'()'),'!BAD_CODE_FILE'); if dir = '!BAD_DIRECTORY' or code = '!BAD_CODE_FILE' then put "WARNING: Bad directory or code file name!" / "WARNING- Check tag: " token ; path=cats('/',dir,'/',code,'.sas'); /* .sas */ run; title; title1 "List of tags with value _ALL_ for 'dir' or 'code' variable."; title2 "Snippets tagged this way will be copied to multiple files."; proc print data=w.files(where=(dir = '_all_' OR code = '_all_')); run; title; data w.files; if 0=nobs then put "WARNING: No tags found in the file"; set w.files end=_E_ nobs=nobs; where dir NE '_all_' AND code NE '_all_'; n+1; if 1 = _E_ then call symputX('nobs',n,"L"); run; title; title "List of files"; proc print data=w.files; run; title; data _null_; set w.files; rc = libname("_",catx("/",symget('packagePath'),dir)); rc = libname("_"); run; filename f DUMMY; data _null_; if 1 =_N_ then do; array paths[0:&nobs.] $ 128 _temporary_; array starts[0:&nobs.] _temporary_; array ends[0:&nobs.] _temporary_; array write[0:&nobs.] _temporary_; array firstLine[0:&nobs.] _temporary_; declare hash H(); H.defineKey('token'); H.defineData('n'); H.defineDone(); do until(_E_); set w.files end=_E_; paths[n]=path; starts[n]=start; ends[n]=end; write[n]=0; rc=H.add(); firstLine[n]=1; end; _E_=.; length packagePath $ 4096; retain packagePath " "; packagePath=symget('packagePath'); end; infile source END=_E_; input; length line /*lineToPrint*/ $ 4096; line = left(lowcase(_infile_)); /*lineToPrint=_infile_;*/ block=scan(line,1," "); if block in ( '/*##$##-code-block-start-##$##' '/*##$##-code-block-end-##$##' ) then do; /********************************************************/ if substr(block,20,1) = 's' then do; s=1; e=0; end; else do; s=0; e=1; end; i=1; token=block; do while(i); i+1; token=scan(line,i," "); if token='*/' OR token=' ' then i=0; /* if it is the end of list - stop */ else if token='_all_(_all_)' then /* if this is a snippet for ALL files in a package */ do k=1 to &nobs.; starts[k]+ -s; ends[k] + -e; write[k] + (s-e); end; else if scan(token,2,'()')='_all_' then /* if this is a snippet for ALL files in a type */ do k=1 to &nobs.; if scan(token,1,'()')=scan(paths[k],1,'/\') then do; starts[k]+ -s; ends[k] + -e; write[k] + (s-e); end; end; else if scan(token,1,'()')='_all_' then /* if this is a snippet for ALL files with the same name */ do k=1 to &nobs.; if (scan(token,2,'()')!!'.sas')=scan(paths[k],2,'/\') then do; starts[k]+ -s; ends[k] + -e; write[k] + (s-e); end; end; else /* all other "regular" cases */ do; if 0=H.find() then do; starts[n]+ -s; ends[n] + -e; write[n] + (s-e); select; when(write[n]<0) putlog "ERROR: Wrong tags order for " token=; when(write[n]>1) do; putlog "WARNING: Doubled value for tag" token=; putlog "WARNING- detected in line " _N_; putlog "WARNING- Check also counterpart block."; end; otherwise; end; end; end; end; /********************************************************/ end; else do j = 1 to hbound(write); if write[j]>0 then do; length fvariable $ 4096; fvariable=catx("/",packagePath,paths[j]); file f FILEVAR=fvariable MOD; /* lineToPrintLen=(lengthn(lineToPrint)); if lineToPrintLen then put @1 lineToPrint $varying4096. lineToPrintLen; else put; */ if firstLine[j] then do; put '/* File generated with help of SAS Packages Framework, version 20260615. */'; firstLine[j]=0; end; put _infile_; end; end; run; filename f clear; libname w clear; ))); %put NOTE- --&sysmacroname.-END--; options &options_tmp2.; %ENDofsplitCodeForPackage: %mend splitCodeForPackage;