/*+headerPackage+*/
/**############################################################################**/
/* */
/* Copyright Bartosz Jablonski, since July 2019 onward. */
/* */
/* Code is free and open source. If you want - you can use it. */
/* I tested it the best I could */
/* but it comes with absolutely no warranty whatsoever. */
/* If you cause any damage or something - it will be your own fault. */
/* You have been warned! You are using it on your own risk. */
/* However, if you decide to use it do not forget to mention author: */
/* Bartosz Jablonski (yabwon@gmail.com) */
/* */
/* Here is the official version: */
/*
Copyright (c) 2019 - 2026 Bartosz Jablonski (yabwon@gmail.com)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
*/
/**#############################################################################**/
/*** HELP START ***/
/* SPF (SAS Packages Framework) is a set of macros:
- to install,
- to load,
- to get help,
- to unload, or
- to generate SAS packages.
SAS Packages Framework, version 20260615.
See examples below.
A SAS package is a zip file containing a group of files
with SAS code (macros, functions, data steps generating
data, etc.) wrapped up together and %INCLUDEed by
a single load.sas file (also embedded inside the zip).
Contributors:
- Stu Sztukowski
LinkedIn: https://www.linkedin.com/in/statsguy/
GitHub: https://github.com/stu-code
- Ken Nakamatsu
LinkedIn: https://www.linkedin.com/in/k-nkmt
GitHub: https://github.com/k-nkmt
*/
/*** HELP END ***/
/*+SPFint_gnPckg_markdown+*/
%macro SPFint_gnPckg_markdown()/secure minoperator
des='SAS Packages Framework internal macro. Executable only inside the %generatePackage() macro. The macro encapsulates the markdown documentation part of the process. Version 20260615.';
/* macro picks up all macrovariables from external scope, so from the %generatePackage() macro */
%if %sysmexecname(%sysmexecdepth-1) in (GENERATEPACKAGE) %then
%do;
/*=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=*/
/* generate MarkDown documentation file */
/* check param value */
%if %superq(markdownDoc) NE 1 %then %let markdownDoc=0;
/* if true then execute */
%if &markdownDoc.=1 %then
%do;
%if %superq(createPackageContentStatus) NE 0 %then
%do;
%put ERROR- ** [&sysmacroname.] **;
%put ERROR: ** ERRORS IN PACKAGE CONTENT CREATION! **;
%put ERROR- ** NO MARKDOWN DOCUMMENTATION WILL BE GENERATED. **;
%GOTO NOmarkdownDoc;
%end;
/*= generate MarkDown documentation START =================================================================================*/
%put NOTE-;
%put NOTE: Preparing markdown documentation file.;
%put NOTE- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^;
%put NOTE-;
%local MarkDownOptionsTmp;
%let MarkDownOptionsTmp =
%sysfunc(getoption(notes)) %sysfunc(getoption(source)) msglevel=%sysfunc(getoption(msglevel));
options NOnotes NOsource msglevel=N;
filename &zipReferrence. "&buildLocation./%sysfunc(lowcase(&packageName.)).md";
filename &_PackageFileref_. ZIP "&buildLocation./%sysfunc(lowcase(&packageName.)).zip";
data &filesWithCodes.markdown;
/* break if no data */
if NOBS = 0 then stop;
file &zipReferrence. encoding = &packageEncoding.;
put "# Documentation for the `&packageName.` package.";
length packageLicense packageGenerated $ 64
packageTitle packageAuthor packageMaintainer $ 4096
packageHashF packageHashC $ 128
;
packageLicense=symget("packageLicense");
packageTitle=symget("packageTitle");
packageGenerated=symget("packageGenerated");
packageAuthor=symget("packageAuthor");
packageMaintainer=symget("packageMaintainer");
packageHashF=symget("packageHashF");
packageHashC=symget("packageHashC");
drop package:;
put " " / 64*"-" / " "
/ ' *' packageTitle +(-1)'* '
/ " " / 64*"-" / " "
/ "### Version information:"
/ " "
/ "- Package: &packageName."
/ "- Version: &packageVersion."
/ "- Generated: " packageGenerated
/ "- Author(s): " packageAuthor
/ "- Maintainer(s): " packageMaintainer
/ "- License: " packageLicense
/ "- File SHA256: `" packageHashF +(-1) "` for this version"
/ "- Content SHA256: `" packageHashC +(-1) "` for this version"
/ " " / "---" / " ";
put "# The `&packageName.` package, version: `&packageVersion.`;"
/ " " / "---" / " ";
do until (EOF);
infile &_PackageFileref_.(description.sas) end = EOF;
input;
if upcase(strip(_infile_)) =: "DESCRIPTION END:" then printer = 0;
if printer then put _infile_;
if upcase(strip(_infile_)) =: "DESCRIPTION START:" then printer = 1;
end;
put " " / "---" / " ";
%if %superq(packageRequired) ne %then
%do;
put " " / "---" / " ";
length req $ 256;
put "Required SAS Components: ";
do req = &packageRequired. ;
put @3 "-" @5 req;
end ;
%end;
%if %superq(packageReqPackages) ne %then
%do;
put " " / "---" / " ";
length req2 $ 256;
put "Required SAS Packages: ";
do req2 = &packageReqPackages.;
put @3 "-" @5 req2;
end ;
%end;
put " " / "---" / " ";
%if %superq(additionalContent) NE %then
%do;
put " " / "---" / " ";
put 'Package contains additional content, run: `%loadPackageAddCnt(' "&packageName." ')` to load it'
/ "or look for the `%sysfunc(lowcase(&packageName.))_AdditionalContent` directory in the `packages` fileref"
/ "localization (only if additional content was deployed during the installation process).";
%end;
put " " / "---------------------------------------------------------------------" / " "
/ "*SAS package generated by SAS Package Framework, version `20260615`,*"
/ "*under `&sysscp.`(`&sysscpl.`) operating system,*"
/ "*using SAS release: `&sysvlong4.`.*"
/ " " / "---------------------------------------------------------------------" / " ";
put "# The `&packageName.` package content";
put "The `&packageName.` package consists of the following content:" / " ";
EOFDS = 0;
do until(EOFDS);
/* content is created during package creation */
set &filesWithCodes. end = EOFDS nobs = NOBS curobs = CUROBS;
if upcase(type) in: ('TEST') then continue; /* exclude tests */
/*
To exclude file from being added to the documentation
insert the "excluding" text(see below) as a comment
in the FIRST or SECOND line of the file!
Do not add spaces.
For each file the first line is read in and checked.
*/
length _FILEVARPATH_ $ 4096;
_FILEVARPATH_=catx("/",base,folder,file);
infile _dummy_ FILEVAR=_FILEVARPATH_;
input;
if strip(_infile_) IN (
'/*##DoNotUse4Documentation##*/'
'/*##ExcludeFromDocumentation##*/'
'/*##ExcludeFromMarkdownDoc##*/'
)
then continue; /* exclude file from documentation after FIRST line */
input;
if strip(_infile_) IN (
'/*##DoNotUse4Documentation##*/'
'/*##ExcludeFromDocumentation##*/'
'/*##ExcludeFromMarkdownDoc##*/'
)
then continue; /* exclude file from documentation after SECOND line */
/* this is because %splitCodeForPackage() macro adds one extra line */
type2=type;
length link $ 256;
link=catx("-",compress(fileshort,,"KAD"),type,CUROBS);
length fileshort $ 256;
select;
when (upcase(type) =: "MACRO" ) do; fileshort2 = cats('`%', fileshort, "()`"); type2='macro'; end;
when (upcase(type) =: "FORMAT" ) do; fileshort2 = cats("`$", fileshort, ".`"); type2='format/informat'; end;
when (upcase(type) =: "FUNCTION" ) do; fileshort2 = cats("`", fileshort, "()`"); type2='function'; end;
when (upcase(type) =: "IMLMODULE") fileshort2 = cats("`", fileshort, "()`");
when (upcase(type) =: "PROTO" ) fileshort2 = cats("`", fileshort, "()`");
when (upcase(type) =: "CASLUDF" ) fileshort2 = cats("`", fileshort, "()`");
otherwise fileshort2 = cats("`", fileshort, "`");
end;
contentObs + 1;
put @1 contentObs +(-1) '. [' fileshort2 type2'](#' link ')';
output;
end;
put " " / " ";
contentObs+1;
put @1 contentObs +(-1) '. [License note](#license)';
put " " / "---" / " ";
putlog "Doc. note with general information ready.";
stop;
run;
/* loop through content and print info to the MD file */
data _null_;
if 0 = NOBS then stop;
do until(EOFDS);
set &filesWithCodes.markdown end = EOFDS nobs = NOBS curobs=CUROBS;
length memberX $ 1024;
memberX = cats("_",folder,".",file);
/* inner data step in call execute to read each embedded file */
call execute("data _null_; ");
call execute(" file &zipReferrence. encoding = &packageEncoding. MOD; ");
call execute(' put ''## ' !! catx(" ",fileshort2,type2) !! ' ######'';');
call execute(' infile &_PackageFileref_.(' || strip(memberX) || ') end = EOF; ');
call execute(" printer = 0; ");
call execute(" do until(EOF); ");
call execute(" input; length _endhelpline_ _starthelpline_ $ 32767; ");
call execute(" _endhelpline_ = upcase(reverse(strip(_infile_))); ");
call execute(" if 18 <= lengthn(_endhelpline_) AND _endhelpline_
=: '/*** DNE PLEH ***/' then printer = 0; "); /* ends with HELP END */
call execute(" if printer then put _infile_; ");
call execute(" _starthelpline_ = upcase(strip(_infile_)); ");
call execute(" if 20 <= lengthn(_starthelpline_) AND _starthelpline_
=: '/*** HELP START ***/' then printer = 1 ; "); /* starts with HELP START */
call execute(" end; ");
call execute(' put " " / "---" / " "; ');
call execute(' putlog ''Doc. note ' !! cats(CUROBS) !! ' for ' !! catx(" ",fileshort2,type2) !! ' ready.'';');
call execute(" stop; ");
call execute("run; ");
end;
stop;
run;
/* license info */
data _null_;
file &zipReferrence. encoding = &packageEncoding. MOD;
putlog "Doc. note with license ready.";
put " " / "---" / " "
/ '# License ######' / " "
;
do until (EOF_L);
infile &_PackageFileref_.(license.sas) end = EOF_L;
input;
put _infile_;
end;
put " " / "---" / " ";
stop;
run;
options &MarkDownOptionsTmp.;
%put NOTE: Markdown file generated.;
filename &zipReferrence. list;
%put NOTE- ;
options NOnotes NOsource msglevel=N;
filename &zipReferrence. clear;
filename &_PackageFileref_. clear;
options &MarkDownOptionsTmp.;
/*= generate MarkDown documentation END =================================================================================*/
%NOmarkdownDoc:
%end;
/*=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=*/
%end;
%else
%do;
%put INFO: SAS Packages Framework internal macro. Executable only inside the %nrstr(%%)generatePackage() macro.;
%end;
%mend SPFint_gnPckg_markdown;