fix: switch postinstall to prepare

fix: setting syscc to zero to prevent error state in response.  Close…

all.sas

@@ -1678,6 +1678,7 @@ Usage:
         sysuserid=symget('sysuserid');
         iftrue=symget('iftrue');
         put (_all_)(/=);
+        call symputx('syscc',0);
         abort cancel nolist;
       run;
     %end;
@@ -2172,6 +2173,128 @@ Usage:
   drop table &ds;
 
 %mend mp_assertdsobs;/**
+  @file
+  @brief Convert a file to/from base64 format
+  @details Creates a new version of a file either encoded or decoded using
+  Base64.  Inspired by this post by Michael Dixon:
+  https://support.selerity.com.au/hc/en-us/articles/223345708-Tip-SAS-and-Base64
+
+  Usage:
+
+        filename tmp temp;
+        data _null_;
+          file tmp;
+          put 'base ik ally';
+        run;
+        %mp_base64copy(inref=tmp, outref=myref, action=ENCODE)
+
+        data _null_;
+          infile myref;
+          input;
+          put _infile_;
+        run;
+
+        %mp_base64copy(inref=myref, outref=mynewref, action=DECODE)
+
+        data _null_;
+          infile mynewref;
+          input;
+          put _infile_;
+        run;
+
+  @param [in] inref= Fileref of the input file (should exist)
+  @param [out] outref= Output fileref. If it does not exist, it is created.
+  @param [in] action= (ENCODE) The action to take. Valid values:
+    @li ENCODE - Convert the file to base64 format
+    @li DECODE - Decode the file from base64 format
+
+  @version 9.2
+  @author Allan Bowe, source: https://github.com/sasjs/core
+
+  <h4> SAS Macros </h4>
+  @li mp_abort.sas
+
+
+**/
+
+%macro mp_base64copy(
+  inref=0,
+  outref=0,
+  action=ENCODE
+)/*/STORE SOURCE*/;
+
+%let inref=%upcase(&inref);
+%let outref=%upcase(&outref);
+%let action=%upcase(&action);
+%local infound outfound;
+%let infound=0;
+%let outfound=0;
+data _null_;
+  set sashelp.vextfl(where=(fileref="&inref" or fileref="&outref"));
+  if fileref="&inref" then call symputx('infound',1,'l');
+  if fileref="&outref" then call symputx('outfound',1,'l');
+run;
+
+%mp_abort(iftrue= (&infound=0)
+  ,mac=&sysmacroname
+  ,msg=%str(INREF &inref NOT FOUND!)
+)
+%mp_abort(iftrue= (&outref=0)
+  ,mac=&sysmacroname
+  ,msg=%str(OUTREF NOT PROVIDED!)
+)
+%mp_abort(iftrue= (&action ne ENCODE and &action ne DECODE)
+  ,mac=&sysmacroname
+  ,msg=%str(Invalid action! Should be ENCODE OR DECODE)
+)
+
+%if &outfound=0 %then %do;
+  filename &outref temp lrecl=2097088;
+%%end;
+
+%if &action=ENCODE %then %do;
+  data _null_;
+    length b64 $ 76 line $ 57;
+    retain line "";
+    infile &inref recfm=F lrecl= 1 end=eof;
+    input @1 stream $char1.;
+    file &outref lrecl=76;
+    substr(line,(_N_-(CEIL(_N_/57)-1)*57),1) = byte(rank(stream));
+    if mod(_N_,57)=0 or EOF then do;
+      if eof then b64=put(trim(line),$base64X76.);
+      else b64=put(line, $base64X76.);
+      put b64;
+      line="";
+    end;
+  run;
+%end;
+%else %if &action=DECODE %then %do;
+  data _null_;
+    length filein 8 fileout 8;
+    filein = fopen("&inref",'I',4,'B');
+    fileout = fopen("&outref",'O',3,'B');
+    char= '20'x;
+    do while(fread(filein)=0);
+      raw="1234";
+      do i=1 to 4;
+        rc=fget(filein,char,1);
+        substr(raw,i,1)=char;
+      end;
+      val="123";
+      val=input(raw,$base64X4.);
+      do i=1 to 3;
+        length byte $1;
+        byte=byte(rank(substr(val,i,1)));
+        rc = fput(fileout, byte);
+      end;
+      rc =fwrite(fileout);
+    end;
+    rc = fclose(filein);
+    rc = fclose(fileout);
+  run;
+%end;
+
+%mend mp_base64copy;/**
   @file
   @brief Copy any file using binary input / output streams
   @details Reads in a file byte by byte and writes it back out.  Is an
@@ -6241,8 +6364,11 @@ libname &lib clear;
     |mustbevalidname|can be anything, oops, %abort!!|
 
   @param [in] debug= (log) Provide the _debug value
-  @param [in] viyaresult=(WEBOUT_JSON) The Viya result type to return.  For
+  @param [in] mdebug= (0) Set to 1 to provide macro debugging
+  @param [in] viyaresult= (WEBOUT_JSON) The Viya result type to return.  For
     more info, see mv_getjobresult.sas
+  @param [in] viyacontext= (SAS Job Execution compute context) The Viya compute
+    context on which to run the service
   @param [out] outlib= (0) Output libref to contain the final tables.  Set to
     0 if the service output is not in JSON format.
   @param [out] outref= (0) Output fileref to create, to contain the full _webout
@@ -6266,17 +6392,18 @@ libname &lib clear;
   inputfiles=0,
   inputparams=0,
   debug=log,
+  mdebug=0,
   outlib=0,
   outref=0,
-  viyaresult=WEBOUT_JSON
+  viyaresult=WEBOUT_JSON,
+  viyacontext=SAS Job Execution compute context
 )/*/STORE SOURCE*/;
-%local mdebug;
-%if &debug ne 0 %then %do;
-  %let mdebug=1;
+%local dbg;
+%if &mdebug=1 %then %do;
   %put &sysmacroname entry vars:;
   %put _local_;
 %end;
-%else %let mdebug=0;
+%else %let dbg=*;
 
 /* sanitise inputparams */
 %local pcnt;
@@ -6431,6 +6558,7 @@ libname &lib clear;
 
   data &ds1;
     retain _program "&program";
+    retain _contextname "&viyacontext";
     set &ds1;
     putlog "&sysmacroname inputparams:";
     putlog (_all_)(=);
@@ -12702,9 +12830,7 @@ data _null_;
   putlog _infile_;
 run;
 
-
-%mend mmx_deletemetafolder;
-/**
+%mend mmx_deletemetafolder;/**
   @file mmx_spkexport.sas
   @brief Exports everything in a particular metadata folder
   @details Will export everything in a metadata folder to a specified location.
@@ -12912,9 +13038,13 @@ run;
   @param [in] path= The parent folder in which to create the file
   @param [in] name= The name of the file to be created
   @param [in] inref= The fileref pointing to the file to be uploaded
+  @param [in] intype= (BINARY) The type of the input data.  Valid values:
+    @li BINARY File is copied byte for byte using the mp_binarycopy.sas macro.
+    @li BASE64 File will be first decoded using the mp_base64.sas macro, then
+      loaded byte by byte to SAS Drive.
   @param [in] contentdisp= (inline) Content Disposition. Example values:
-      @li inline
-      @li attachment
+    @li inline
+    @li attachment
 
   @param [in] access_token_var= The global macro variable to contain the access
     token, if using authorization_code grant type.
@@ -12932,6 +13062,7 @@ run;
   @li mf_getuniquefileref.sas
   @li mf_isblank.sas
   @li mp_abort.sas
+  @li mp_base64copy.sas
   @li mp_binarycopy.sas
   @li mv_createfolder.sas
 
@@ -12940,6 +13071,7 @@ run;
 %macro mv_createfile(path=
     ,name=
     ,inref=
+    ,intype=BINARY
     ,contentdisp=inline
     ,access_token_var=ACCESS_TOKEN
     ,grant_type=sas_services
@@ -12994,7 +13126,12 @@ filename &fref filesrvc
   cdisp="&contentdisp"
   lrecl=1048544;
 
-%mp_binarycopy(inref=&inref, outref=&fref)
+%if &intype=BINARY %then %do;
+  %mp_binarycopy(inref=&inref, outref=&fref)
+%end;
+%else %if &intype=BASE64 %then %do;
+  %mp_base64copy(inref=&inref, outref=&fref, action=DECODE)
+%end;
 
 filename &fref clear;
 
@@ -15439,7 +15576,7 @@ run;
 
   @param [in] access_token_var= The global macro variable to contain the access
     token
-  @param [in] mdebug= set to 1 to enable DEBUG messages
+  @param [in] mdebug= (0) Set to 1 to enable DEBUG messages
   @param [in] grant_type= valid values:
     @li password
     @li authorization_code
@@ -15464,7 +15601,6 @@ run;
 **/
 
 %macro mv_getjoblog(uri=0,outref=0
-    ,contextName=SAS Job Execution compute context
     ,access_token_var=ACCESS_TOKEN
     ,grant_type=sas_services
     ,mdebug=0
@@ -15785,7 +15921,6 @@ run;
 **/
 
 %macro mv_getjobresult(uri=0
-    ,contextName=SAS Job Execution compute context
     ,access_token_var=ACCESS_TOKEN
     ,grant_type=sas_services
     ,mdebug=0
@@ -15899,10 +16034,11 @@ proc http method='GET' out=&fname2 &oauth_bearer
   ;
 run;
 %if &mdebug=1 %then %do;
+  /* send one char at a time as the json can be very wide */
   data _null_;
-    infile &fname2 lrecl=32767;
-    input;
-    putlog _infile_;
+    infile &fname2 recfm=n;
+    input char $char1. ;
+    putlog char $char1. @;
   run;
 %end;
 
@@ -16659,6 +16795,11 @@ run;
 %if &mdebug=1 %then %do;
   %put &sysmacroname entry vars:;
   %put _local_;
+  %put inds vars:;
+  data _null_;
+    set &inds;
+    putlog (_all_)(=);
+  run;
 %end;
 %else %let dbg=*;
 
@@ -16703,6 +16844,7 @@ run;
       retain FLOW_ID 0;
     %end;
     set &inds;
+    &dbg. putlog (_all_)(=);
   run;
 %end;
 
@@ -16767,6 +16909,8 @@ data;run;%let jdswaitfor=&syslast;
       call symputx(cats('job',_n_),_program,'l');
       call symputx(cats('context',_n_),_contextName,'l');
       call symputx('jcnt',_n_,'l');
+      &dbg. if _n_= 1 then putlog "Loop &fid";
+      &dbg. putlog (_all_)(=);
     run;
     %put exporting job variables in json format;
     %do jid=1 %to &jcnt;
@@ -16828,6 +16972,7 @@ data;run;%let jdswaitfor=&syslast;
               ,name=&jobname
               ,paramstring=%superq(jparams&jid)
               ,outds=&jdsapp
+              ,contextname=&&context&jid
             )
             data &jdsapp;
               format jobparams $32767.;

base/mp_abort.sas

@@ -165,6 +165,7 @@
         sysuserid=symget('sysuserid');
         iftrue=symget('iftrue');
         put (_all_)(/=);
+        call symputx('syscc',0);
         abort cancel nolist;
       run;
     %end;

base/mp_base64copy.sas

@@ -0,0 +1,123 @@
+/**
+  @file
+  @brief Convert a file to/from base64 format
+  @details Creates a new version of a file either encoded or decoded using
+  Base64.  Inspired by this post by Michael Dixon:
+  https://support.selerity.com.au/hc/en-us/articles/223345708-Tip-SAS-and-Base64
+
+  Usage:
+
+        filename tmp temp;
+        data _null_;
+          file tmp;
+          put 'base ik ally';
+        run;
+        %mp_base64copy(inref=tmp, outref=myref, action=ENCODE)
+
+        data _null_;
+          infile myref;
+          input;
+          put _infile_;
+        run;
+
+        %mp_base64copy(inref=myref, outref=mynewref, action=DECODE)
+
+        data _null_;
+          infile mynewref;
+          input;
+          put _infile_;
+        run;
+
+  @param [in] inref= Fileref of the input file (should exist)
+  @param [out] outref= Output fileref. If it does not exist, it is created.
+  @param [in] action= (ENCODE) The action to take. Valid values:
+    @li ENCODE - Convert the file to base64 format
+    @li DECODE - Decode the file from base64 format
+
+  @version 9.2
+  @author Allan Bowe, source: https://github.com/sasjs/core
+
+  <h4> SAS Macros </h4>
+  @li mp_abort.sas
+
+
+**/
+
+%macro mp_base64copy(
+  inref=0,
+  outref=0,
+  action=ENCODE
+)/*/STORE SOURCE*/;
+
+%let inref=%upcase(&inref);
+%let outref=%upcase(&outref);
+%let action=%upcase(&action);
+%local infound outfound;
+%let infound=0;
+%let outfound=0;
+data _null_;
+  set sashelp.vextfl(where=(fileref="&inref" or fileref="&outref"));
+  if fileref="&inref" then call symputx('infound',1,'l');
+  if fileref="&outref" then call symputx('outfound',1,'l');
+run;
+
+%mp_abort(iftrue= (&infound=0)
+  ,mac=&sysmacroname
+  ,msg=%str(INREF &inref NOT FOUND!)
+)
+%mp_abort(iftrue= (&outref=0)
+  ,mac=&sysmacroname
+  ,msg=%str(OUTREF NOT PROVIDED!)
+)
+%mp_abort(iftrue= (&action ne ENCODE and &action ne DECODE)
+  ,mac=&sysmacroname
+  ,msg=%str(Invalid action! Should be ENCODE OR DECODE)
+)
+
+%if &outfound=0 %then %do;
+  filename &outref temp lrecl=2097088;
+%%end;
+
+%if &action=ENCODE %then %do;
+  data _null_;
+    length b64 $ 76 line $ 57;
+    retain line "";
+    infile &inref recfm=F lrecl= 1 end=eof;
+    input @1 stream $char1.;
+    file &outref lrecl=76;
+    substr(line,(_N_-(CEIL(_N_/57)-1)*57),1) = byte(rank(stream));
+    if mod(_N_,57)=0 or EOF then do;
+      if eof then b64=put(trim(line),$base64X76.);
+      else b64=put(line, $base64X76.);
+      put b64;
+      line="";
+    end;
+  run;
+%end;
+%else %if &action=DECODE %then %do;
+  data _null_;
+    length filein 8 fileout 8;
+    filein = fopen("&inref",'I',4,'B');
+    fileout = fopen("&outref",'O',3,'B');
+    char= '20'x;
+    do while(fread(filein)=0);
+      raw="1234";
+      do i=1 to 4;
+        rc=fget(filein,char,1);
+        substr(raw,i,1)=char;
+      end;
+      val="123";
+      val=input(raw,$base64X4.);
+      do i=1 to 3;
+        length byte $1;
+        byte=byte(rank(substr(val,i,1)));
+        rc = fput(fileout, byte);
+      end;
+      rc =fwrite(fileout);
+    end;
+    rc = fclose(filein);
+    rc = fclose(fileout);
+  run;
+%end;
+
+%mend mp_base64copy;

base/mp_testservice.sas

@@ -22,8 +22,11 @@
     |mustbevalidname|can be anything, oops, %abort!!|
 
   @param [in] debug= (log) Provide the _debug value
-  @param [in] viyaresult=(WEBOUT_JSON) The Viya result type to return.  For
+  @param [in] mdebug= (0) Set to 1 to provide macro debugging
+  @param [in] viyaresult= (WEBOUT_JSON) The Viya result type to return.  For
     more info, see mv_getjobresult.sas
+  @param [in] viyacontext= (SAS Job Execution compute context) The Viya compute
+    context on which to run the service
   @param [out] outlib= (0) Output libref to contain the final tables.  Set to
     0 if the service output is not in JSON format.
   @param [out] outref= (0) Output fileref to create, to contain the full _webout
@@ -47,17 +50,18 @@
   inputfiles=0,
   inputparams=0,
   debug=log,
+  mdebug=0,
   outlib=0,
   outref=0,
-  viyaresult=WEBOUT_JSON
+  viyaresult=WEBOUT_JSON,
+  viyacontext=SAS Job Execution compute context
 )/*/STORE SOURCE*/;
-%local mdebug;
-%if &debug ne 0 %then %do;
-  %let mdebug=1;
+%local dbg;
+%if &mdebug=1 %then %do;
   %put &sysmacroname entry vars:;
   %put _local_;
 %end;
-%else %let mdebug=0;
+%else %let dbg=*;
 
 /* sanitise inputparams */
 %local pcnt;
@@ -212,6 +216,7 @@
 
   data &ds1;
     retain _program "&program";
+    retain _contextname "&viyacontext";
     set &ds1;
     putlog "&sysmacroname inputparams:";
     putlog (_all_)(=);

package.json

@@ -30,9 +30,9 @@
     "docs": "sasjs doc && ./sasjs/utils/build.sh",
     "test": "sasjs test -t viya",
     "lint": "sasjs lint",
-    "postinstall": "[ -d .git ] && git config core.hooksPath ./.git-hooks || true"
+    "prepare": "[ -d .git ] && git config core.hooksPath ./.git-hooks || true"
   },
   "devDependencies": {
-    "@sasjs/cli": "^2.27.0"
+    "@sasjs/cli": "2.27.0"
   }
 }

viya/mv_createfile.sas

@@ -17,9 +17,13 @@
   @param [in] path= The parent folder in which to create the file
   @param [in] name= The name of the file to be created
   @param [in] inref= The fileref pointing to the file to be uploaded
+  @param [in] intype= (BINARY) The type of the input data.  Valid values:
+    @li BINARY File is copied byte for byte using the mp_binarycopy.sas macro.
+    @li BASE64 File will be first decoded using the mp_base64.sas macro, then
+      loaded byte by byte to SAS Drive.
   @param [in] contentdisp= (inline) Content Disposition. Example values:
-      @li inline
-      @li attachment
+    @li inline
+    @li attachment
 
   @param [in] access_token_var= The global macro variable to contain the access
     token, if using authorization_code grant type.
@@ -37,6 +41,7 @@
   @li mf_getuniquefileref.sas
   @li mf_isblank.sas
   @li mp_abort.sas
+  @li mp_base64copy.sas
   @li mp_binarycopy.sas
   @li mv_createfolder.sas
 
@@ -45,6 +50,7 @@
 %macro mv_createfile(path=
     ,name=
     ,inref=
+    ,intype=BINARY
     ,contentdisp=inline
     ,access_token_var=ACCESS_TOKEN
     ,grant_type=sas_services
@@ -99,7 +105,12 @@ filename &fref filesrvc
   cdisp="&contentdisp"
   lrecl=1048544;
 
-%mp_binarycopy(inref=&inref, outref=&fref)
+%if &intype=BINARY %then %do;
+  %mp_binarycopy(inref=&inref, outref=&fref)
+%end;
+%else %if &intype=BASE64 %then %do;
+  %mp_base64copy(inref=&inref, outref=&fref, action=DECODE)
+%end;
 
 filename &fref clear;
 

viya/mv_getjoblog.sas

@@ -66,7 +66,7 @@
 
   @param [in] access_token_var= The global macro variable to contain the access
     token
-  @param [in] mdebug= set to 1 to enable DEBUG messages
+  @param [in] mdebug= (0) Set to 1 to enable DEBUG messages
   @param [in] grant_type= valid values:
     @li password
     @li authorization_code
@@ -91,7 +91,6 @@
 **/
 
 %macro mv_getjoblog(uri=0,outref=0
-    ,contextName=SAS Job Execution compute context
     ,access_token_var=ACCESS_TOKEN
     ,grant_type=sas_services
     ,mdebug=0

viya/mv_getjobresult.sas

@@ -90,7 +90,6 @@
 **/
 
 %macro mv_getjobresult(uri=0
-    ,contextName=SAS Job Execution compute context
     ,access_token_var=ACCESS_TOKEN
     ,grant_type=sas_services
     ,mdebug=0
@@ -204,10 +203,11 @@ proc http method='GET' out=&fname2 &oauth_bearer
   ;
 run;
 %if &mdebug=1 %then %do;
+  /* send one char at a time as the json can be very wide */
   data _null_;
-    infile &fname2 lrecl=32767;
-    input;
-    putlog _infile_;
+    infile &fname2 recfm=n;
+    input char $char1. ;
+    putlog char $char1. @;
   run;
 %end;
 

viya/mv_jobflow.sas

@@ -140,6 +140,11 @@
 %if &mdebug=1 %then %do;
   %put &sysmacroname entry vars:;
   %put _local_;
+  %put inds vars:;
+  data _null_;
+    set &inds;
+    putlog (_all_)(=);
+  run;
 %end;
 %else %let dbg=*;
 
@@ -184,6 +189,7 @@
       retain FLOW_ID 0;
     %end;
     set &inds;
+    &dbg. putlog (_all_)(=);
   run;
 %end;
 
@@ -248,6 +254,8 @@ data;run;%let jdswaitfor=&syslast;
       call symputx(cats('job',_n_),_program,'l');
       call symputx(cats('context',_n_),_contextName,'l');
       call symputx('jcnt',_n_,'l');
+      &dbg. if _n_= 1 then putlog "Loop &fid";
+      &dbg. putlog (_all_)(=);
     run;
     %put exporting job variables in json format;
     %do jid=1 %to &jcnt;
@@ -309,6 +317,7 @@ data;run;%let jdswaitfor=&syslast;
               ,name=&jobname
               ,paramstring=%superq(jparams&jid)
               ,outds=&jdsapp
+              ,contextname=&&context&jid
             )
             data &jdsapp;
               format jobparams $32767.;