feat: mv_getjoblog.sas macro - will fetch a SAS log from an executed SAS Viya log and append it to a fileref.

mv_jobwaitfor is updated to allow the log to be fetched for all the submitted jobs.

all.sas

@@ -229,6 +229,32 @@ options noquotelenmax;
 %mend;
 
 /** @endcond *//**
+  @file
+  @brief Checks whether a fileref exists
+  @details You can probably do without this macro as it is just a one liner.
+  Mainly it is here as a convenient way to remember the syntax!
+
+  @param fref the fileref to detect
+
+  @return output Returns 1 if found and 0 if not found.  Note - it is possible
+  that the fileref is found, but the file does not (yet) exist. If you need
+  to test for this, you may as well use the fileref function directly.
+
+  @version 8
+  @author [Allan Bowe](https://www.linkedin.com/in/allanbowe/)
+**/
+
+%macro mf_existfileref(fref
+)/*/STORE SOURCE*/;
+
+  %if %sysfunc(fileref(&fref))=0 %then %do;
+    1
+  %end;
+  %else %do;
+    0
+  %end;
+
+%mend;/**
   @file
   @brief Checks if a variable exists in a data set.
   @details Returns 0 if the variable does NOT exist, and return the position of
@@ -577,11 +603,18 @@ options noquotelenmax;
   @brief Adds custom quotes / delimiters to a  delimited string
   @details Can be used in open code, eg as follows:
 
-    %put %mf_getquotedstr(blah   blah  blah);
+      %put %mf_getquotedstr(blah   blah  blah);
 
   which returns:
 > 'blah','blah','blah'
 
+  Alternatively:
+
+      %put %mf_getquotedstr(these words are double quoted,quote=D)
+
+  for:
+> "these","words","are","double","quoted"
+
   @param in_str the unquoted, spaced delimited string to transform
   @param dlm= the delimeter to be applied to the output (default comma)
   @param indlm= the delimeter used for the input (default is space)
@@ -4754,6 +4787,97 @@ proc sql
  %mp_binarycopy(inloc="&inloc",outref=_webout)
 %end;
 
+%mend;/**
+  @file
+  @brief Runs arbitrary code for a specified amount of time
+  @details Executes a series of procs and data steps to enable performance
+  testing of arbitrary jobs.
+
+      %mp_testjob(
+         duration=60*5
+      )
+
+  @param [in] duration= the time in seconds which the job should run for. Actual
+  time may vary, as the check is done in between steps.  Default = 30 (seconds).
+
+  <h4> SAS Macros </h4>
+  @li mf_getuniquelibref.sas
+  @li mf_getuniquename.sas
+  @li mf_mkdir.sas
+
+  @version 9.4
+  @author Allan Bowe
+
+**/
+
+%macro mp_testjob(duration=30
+)/*/STORE SOURCE*/;
+%local lib dir ds1 ds2 ds3 start_tm i;
+
+%let start_tm=%sysfunc(datetime());
+%let duration=%sysevalf(&duration);
+
+/* create a temporary library in WORK */
+%let lib=%mf_getuniquelibref();
+%let dir=%mf_getuniquename();
+%mf_mkdir(%sysfunc(pathname(work))/&dir)
+libname &lib "%sysfunc(pathname(work))/&dir";
+
+/* loop through until time expires */
+%let ds1=%mf_getuniquename();
+%let ds2=%mf_getuniquename();
+%let ds3=%mf_getuniquename();
+%do i=0 %to 1;
+
+  /* create big dataset */
+  data &lib..&ds1(compress=no );
+    do x=1 to 1000000;
+      randnum0=ranuni(0)*3;
+      randnum1=ranuni(0)*2;
+      bigchar=repeat('A',300);
+      output;
+    end;
+  run;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  proc summary ;
+    class randnum0 randnum1;
+    output out=&lib..&ds2;
+  run;quit;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  /* add more data */
+  proc sql;
+  create table &lib..&ds3 as
+    select *, ranuni(0)*10 as randnum2
+  from &lib..&ds1
+  order by randnum1;
+  quit;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  proc sort data=&lib..&ds3;
+    by descending x;
+  run;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  /* wait 5 seconds */
+  data _null_;
+    call sleep(5,1);
+  run;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  %let i=0;
+
+%end;
+
+%gate:
+%put time is up!;
+proc datasets lib=&lib kill;
+run;
+quit;
+libname &lib clear;
+
+
 %mend;/**
   @file mp_testwritespeedlibrary.sas
   @brief Tests the write speed of a new table in a SAS library
@@ -12363,10 +12487,10 @@ run;
 %let fname3=%mf_getuniquefileref();
 %let fpath1=%sysfunc(pathname(&fname1));
 %let fpath2=%sysfunc(pathname(&fname2));
-%let fpath3=%sysfunc(pathname(&fname2));
+%let fpath3=%sysfunc(pathname(&fname3));
 
 /* compile the lua JSON module */
-%ml_json() 
+%ml_json()
 /* read using LUA - this allows the code to be of any length */
 data _null_;
   file "&fpath3..lua";
@@ -12396,7 +12520,275 @@ data _null_;
 run;
 filename &fname1 clear;
 filename &fname2 clear;
+filename &fname3 clear;
 %mend;
+/**
+  @file
+  @brief Extract the log from a completed SAS Viya Job
+  @details Extracts log from a Viya job and writes it out to a fileref
+
+  To query the job, you need the URI.  Sample code for achieving this
+  is provided below.
+
+  ## Example
+
+  First, compile the macros:
+
+      filename mc url "https://raw.githubusercontent.com/sasjs/core/main/all.sas";
+      %inc mc;
+
+  Next, create a job (in this case, a web service):
+
+      filename ft15f001 temp;
+      parmcards4;
+        data ;
+          rand=ranuni(0)*1000;
+          do x=1 to rand;
+            y=rand*4;
+            output;
+          end;
+        run;
+        proc sort data=&syslast
+          by descending y;
+        run;
+      ;;;;
+      %mv_createwebservice(path=/Public/temp,name=demo)
+
+  Execute it:
+
+      %mv_jobexecute(path=/Public/temp
+        ,name=demo
+        ,outds=work.info
+      )
+
+  Wait for it to finish, and grab the uri:
+
+      data _null_;
+        set work.info;
+        if method='GET' and rel='self';
+        call symputx('uri',uri);
+      run;
+
+  Finally, fetch the log:
+
+      %mv_getjoblog(uri=&uri,outref=mylog)
+
+  This macro is used by the mv_jobwaitfor macro, which is generally a more
+  convenient way to wait for the job to finish before fetching the log.
+
+
+  @param [in] access_token_var= The global macro variable to contain the access token
+  @param [in] mdebug= set to 1 to enable DEBUG messages
+  @param [in] grant_type= valid values:
+    @li password
+    @li authorization_code
+    @li detect - will check if access_token exists, if not will use sas_services if
+        a SASStudioV session else authorization_code.  Default option.
+    @li sas_services - will use oauth_bearer=sas_services.
+  @param [in] uri= The uri of the running job for which to fetch the status,
+    in the format `/jobExecution/jobs/$UUID/state` (unquoted).
+  @param [out] outref= The output fileref to which to APPEND the log (is always
+  appended).
+
+
+  @version VIYA V.03.04
+  @author Allan Bowe, source: https://github.com/sasjs/core
+
+  <h4> SAS Macros </h4>
+  @li mp_abort.sas
+  @li mf_getplatform.sas
+  @li mf_existfileref.sas
+  @li ml_json.sas
+
+**/
+
+%macro mv_getjoblog(uri=0,outref=0
+    ,contextName=SAS Job Execution compute context
+    ,access_token_var=ACCESS_TOKEN
+    ,grant_type=sas_services
+    ,mdebug=0
+  );
+%local oauth_bearer;
+%if &grant_type=detect %then %do;
+  %if %symexist(&access_token_var) %then %let grant_type=authorization_code;
+  %else %let grant_type=sas_services;
+%end;
+%if &grant_type=sas_services %then %do;
+    %let oauth_bearer=oauth_bearer=sas_services;
+    %let &access_token_var=;
+%end;
+%put &sysmacroname: grant_type=&grant_type;
+%mp_abort(iftrue=(&grant_type ne authorization_code and &grant_type ne password
+    and &grant_type ne sas_services
+  )
+  ,mac=&sysmacroname
+  ,msg=%str(Invalid value for grant_type: &grant_type)
+)
+
+/* validation in datastep for better character safety */
+%local errmsg errflg;
+data _null_;
+  uri=symget('uri');
+  if length(uri)<12 then do;
+    call symputx('errflg',1);
+    call symputx('errmsg',"URI is invalid (too short) - '&uri'",'l');
+  end;
+  if scan(uri,-1)='state' or scan(uri,1) ne 'jobExecution' then do;
+    call symputx('errflg',1);
+    call symputx('errmsg',
+      "URI should be in format /jobExecution/jobs/$$$$UUID$$$$"
+      !!" but is actually like: &uri",'l');
+  end;
+run;
+
+%mp_abort(iftrue=(&errflg=1)
+  ,mac=&sysmacroname
+  ,msg=%str(&errmsg)
+)
+
+%mp_abort(iftrue=(&outref=0)
+  ,mac=&sysmacroname
+  ,msg=%str(Output fileref should be provided)
+)
+
+%if %mf_existfileref(&outref) ne 1 %then %do;
+  filename &outref temp;
+%end;
+
+options noquotelenmax;
+%local base_uri; /* location of rest apis */
+%let base_uri=%mf_getplatform(VIYARESTAPI);
+
+/* prepare request*/
+%local  fname1;
+%let fname1=%mf_getuniquefileref();
+proc http method='GET' out=&fname1 &oauth_bearer
+  url="&base_uri&uri";
+  headers
+  %if &grant_type=authorization_code %then %do;
+          "Authorization"="Bearer &&&access_token_var"
+  %end;
+  ;
+run;
+%if &SYS_PROCHTTP_STATUS_CODE ne 200 and &SYS_PROCHTTP_STATUS_CODE ne 201 %then
+%do;
+  data _null_;infile &fname1;input;putlog _infile_;run;
+  %mp_abort(mac=&sysmacroname
+    ,msg=%str(&SYS_PROCHTTP_STATUS_CODE &SYS_PROCHTTP_STATUS_PHRASE)
+  )
+%end;
+%local  fname2 fname3 fpath1 fpath2 fpath3;
+%let fname2=%mf_getuniquefileref();
+%let fname3=%mf_getuniquefileref();
+%let fpath1=%sysfunc(pathname(&fname1));
+%let fpath2=%sysfunc(pathname(&fname2));
+%let fpath3=%sysfunc(pathname(&fname3));
+
+/* compile the lua JSON module */
+%ml_json()
+/* read using LUA - this allows the code to be of any length */
+data _null_;
+  file "&fpath3..lua";
+  put '
+    infile = io.open (sas.symget("fpath1"), "r")
+    outfile = io.open (sas.symget("fpath2"), "w")
+    io.input(infile)
+    local resp=json.decode(io.read())
+    local logloc=resp["logLocation"]
+    outfile:write(logloc)
+    io.close(infile)
+    io.close(outfile)
+   ';
+run;
+%inc "&fpath3..lua";
+/* get log path*/
+%let errflg=1;
+%let errmsg=No entry in &fname2 fileref;
+data _null_;
+  infile &fname2;
+  input;
+  uri=_infile_;
+  if length(uri)<12 then do;
+    call symputx('errflg',1);
+    call symputx('errmsg',"URI is invalid (too short) - '&uri'",'l');
+  end;
+  if scan(uri,1) ne 'files' or scan(uri,2) ne 'files' then do;
+    call symputx('errflg',1);
+    call symputx('errmsg',
+      "URI should be in format /files/files/$$$$UUID$$$$"
+      !!" but is actually like: &uri",'l');
+  end;
+  call symputx('errflg',0,'l');
+  call symputx('logloc',uri,'l');
+run;
+
+%mp_abort(iftrue=(&errflg=1)
+  ,mac=&sysmacroname
+  ,msg=%str(&errmsg)
+)
+
+/* we have a log uri - now fetch the log */
+proc http method='GET' out=&fname1 &oauth_bearer
+  url="&base_uri&logloc/content";
+  headers
+  %if &grant_type=authorization_code %then %do;
+          "Authorization"="Bearer &&&access_token_var"
+  %end;
+  ;
+run;
+%if &SYS_PROCHTTP_STATUS_CODE ne 200 and &SYS_PROCHTTP_STATUS_CODE ne 201 %then
+%do;
+  data _null_;infile &fname1;input;putlog _infile_;run;
+  %mp_abort(mac=&sysmacroname
+    ,msg=%str(logfetch: &SYS_PROCHTTP_STATUS_CODE &SYS_PROCHTTP_STATUS_PHRASE)
+  )
+%end;
+
+data _null_;
+  file "&fpath3..lua";
+  put '
+    infile = io.open (sas.symget("fpath1"), "r")
+    outfile = io.open (sas.symget("fpath2"), "w")
+    io.input(infile)
+    local resp=json.decode(io.read())
+    for i, v in pairs(resp["items"]) do
+	    outfile:write(v.line,"\n")
+    end
+    io.close(infile)
+    io.close(outfile)
+  ';
+run;
+%inc "&fpath3..lua";
+
+/* write log out to the specified fileref */
+data _null_;
+  infile &fname2 end=last;
+  file &outref mod;
+  if _n_=1 then do;
+    put "/** SASJS Viya Job Log Extract start: &uri **/";
+  end;
+  input;
+  put _infile_;
+  %if &mdebug=0 %then %do;
+    putlog _infile_;
+  %end;
+  if last then do;
+    put "/** SASJS Viya Job Log Extract end: &uri **/";
+  end;
+run;
+
+%if &mdebug=0 %then %do;
+  filename &fname1 clear;
+  filename &fname2 clear;
+  filename &fname3 clear;
+%end;
+%else %do;
+  %put _local_;
+%end;
+%mend;
+
+
+
 /**
   @file
   @brief Extract the status from a running SAS Viya job
@@ -12986,21 +13378,30 @@ libname &libref;
 
   ## Input table (minimum variables needed)
 
-      | variable| description   |
-      |---|---|---|
-      |FLOW_ID| Numeric value, provides sequential ordering capability|
-      |_CONTEXTNAME|Dictates which context should be used to run the job. If
-       blank, will default to `SAS Job Execution compute context`.|
-      |_PROGRAM|Provides the path to the job itself|
+  @li FLOW_ID - Numeric value, provides sequential ordering capability
+  @li _CONTEXTNAME - Dictates which context should be used to run the job. If
+    blank, will default to `SAS Job Execution compute context`.
+  @li _PROGRAM - Provides the path to the job itself
+
+  Any additional variables provided in this table are converted into macro
+  variables and passed into the relevant job.
+
+  | FLOW_ID| _CONTEXTNAME   |_PROGRAM|
+  |---|---|---|
+  |0|SAS Job Execution compute context|/Public/jobs/somejob1|
+  |0|SAS Job Execution compute context|/Public/jobs/somejob2|
 
   ## Output table (minimum variables produced)
 
-      | variable| description   |
-      |---|---|---|
-      |FLOW_ID| Numeric value, provides sequential ordering capability|
-      |_CONTEXTNAME|Dictates which context should be used to run the job. If
-       blank, will default to `SAS Job Execution compute context`.|
-      |_PROGRAM|Provides the path to the job itself|
+  @li _PROGRAM - the SAS Drive path of the job
+  @li URI - the URI of the executed job
+  @li STATE - the completed state of the job
+  @li TIMESTAMP - the datetime that the job completed
+  @li JOBPARAMS - the parameters that were passed to the job
+  @li FLOW_ID - the id of the flow in which the job was executed
+
+  ![https://i.imgur.com/nZE9PvT.png](https://i.imgur.com/nZE9PvT.png)
+
 
   ## Example
 
@@ -13342,7 +13743,7 @@ data;run;%let jdswaitfor=&syslast;
     should be in a `_program` variable.
   @param [out] outds= The output dataset containing the list of states by job
     (default=work.mv_jobexecute)
-
+  @param [out] outref= A fileref to which the spawned job logs should be appended.
 
   @version VIYA V.03.04
   @author Allan Bowe, source: https://github.com/sasjs/core
@@ -13353,6 +13754,7 @@ data;run;%let jdswaitfor=&syslast;
   @li mf_getuniquefileref.sas
   @li mf_existvar.sas
   @li mf_nobs.sas
+  @li mv_getjoblog.sas
 
 **/
 
@@ -13361,6 +13763,7 @@ data;run;%let jdswaitfor=&syslast;
     ,grant_type=sas_services
     ,inds=0
     ,outds=work.mv_jobwaitfor
+    ,outref=0
   );
 %local oauth_bearer;
 %if &grant_type=detect %then %do;
@@ -13404,7 +13807,7 @@ options noquotelenmax;
 data _null_;
   length jobparams $32767;
   set &inds end=last;
-  call symputx(cats('joburi',_n_),uri,'l');
+  call symputx(cats('joburi',_n_),substr(uri,1,55)!!'/state','l');
   call symputx(cats('jobname',_n_),_program,'l');
   call symputx(cats('jobparams',_n_),jobparams,'l');
   if last then call symputx('uricnt',_n_,'l');
@@ -13448,14 +13851,20 @@ run;
     run;
 
     %if &status=completed or &status=failed or &status=canceled %then %do;
+      %local plainuri;
+      %let plainuri=%substr(&&joburi&i,1,55);
       proc sql;
       insert into &outds set
         _program="&&jobname&i",
-        uri="&&joburi&i",
+        uri="&plainuri",
         state="&status",
         timestamp=datetime(),
         jobparams=symget("jobparams&i");
       %let joburi&i=0; /* do not re-check */
+      /* fetch log */
+      %if %str(&outref) ne 0 %then %do;
+        %mv_getjoblog(uri=&plainuri,outref=&outref)
+      %end;
     %end;
     %else %if &status=idle or &status=pending or &status=running %then %do;
       data _null_;

base/mf_existfileref.sas

@@ -0,0 +1,27 @@
+/**
+  @file
+  @brief Checks whether a fileref exists
+  @details You can probably do without this macro as it is just a one liner.
+  Mainly it is here as a convenient way to remember the syntax!
+
+  @param fref the fileref to detect
+
+  @return output Returns 1 if found and 0 if not found.  Note - it is possible
+  that the fileref is found, but the file does not (yet) exist. If you need
+  to test for this, you may as well use the fileref function directly.
+
+  @version 8
+  @author [Allan Bowe](https://www.linkedin.com/in/allanbowe/)
+**/
+
+%macro mf_existfileref(fref
+)/*/STORE SOURCE*/;
+
+  %if %sysfunc(fileref(&fref))=0 %then %do;
+    1
+  %end;
+  %else %do;
+    0
+  %end;
+
+%mend;

base/mf_getquotedstr.sas

@@ -3,11 +3,18 @@
   @brief Adds custom quotes / delimiters to a  delimited string
   @details Can be used in open code, eg as follows:
 
-    %put %mf_getquotedstr(blah   blah  blah);
+      %put %mf_getquotedstr(blah   blah  blah);
 
   which returns:
 > 'blah','blah','blah'
 
+  Alternatively:
+
+      %put %mf_getquotedstr(these words are double quoted,quote=D)
+
+  for:
+> "these","words","are","double","quoted"
+
   @param in_str the unquoted, spaced delimited string to transform
   @param dlm= the delimeter to be applied to the output (default comma)
   @param indlm= the delimeter used for the input (default is space)

base/mp_testjob.sas

@@ -0,0 +1,92 @@
+/**
+  @file
+  @brief Runs arbitrary code for a specified amount of time
+  @details Executes a series of procs and data steps to enable performance
+  testing of arbitrary jobs.
+
+      %mp_testjob(
+         duration=60*5
+      )
+
+  @param [in] duration= the time in seconds which the job should run for. Actual
+  time may vary, as the check is done in between steps.  Default = 30 (seconds).
+
+  <h4> SAS Macros </h4>
+  @li mf_getuniquelibref.sas
+  @li mf_getuniquename.sas
+  @li mf_mkdir.sas
+
+  @version 9.4
+  @author Allan Bowe
+
+**/
+
+%macro mp_testjob(duration=30
+)/*/STORE SOURCE*/;
+%local lib dir ds1 ds2 ds3 start_tm i;
+
+%let start_tm=%sysfunc(datetime());
+%let duration=%sysevalf(&duration);
+
+/* create a temporary library in WORK */
+%let lib=%mf_getuniquelibref();
+%let dir=%mf_getuniquename();
+%mf_mkdir(%sysfunc(pathname(work))/&dir)
+libname &lib "%sysfunc(pathname(work))/&dir";
+
+/* loop through until time expires */
+%let ds1=%mf_getuniquename();
+%let ds2=%mf_getuniquename();
+%let ds3=%mf_getuniquename();
+%do i=0 %to 1;
+
+  /* create big dataset */
+  data &lib..&ds1(compress=no );
+    do x=1 to 1000000;
+      randnum0=ranuni(0)*3;
+      randnum1=ranuni(0)*2;
+      bigchar=repeat('A',300);
+      output;
+    end;
+  run;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  proc summary ;
+    class randnum0 randnum1;
+    output out=&lib..&ds2;
+  run;quit;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  /* add more data */
+  proc sql;
+  create table &lib..&ds3 as
+    select *, ranuni(0)*10 as randnum2
+  from &lib..&ds1
+  order by randnum1;
+  quit;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  proc sort data=&lib..&ds3;
+    by descending x;
+  run;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  /* wait 5 seconds */
+  data _null_;
+    call sleep(5,1);
+  run;
+  %if %sysevalf( (%sysfunc(datetime())-&start_tm)>&duration ) %then %goto gate;
+
+  %let i=0;
+
+%end;
+
+%gate:
+%put time is up!;
+proc datasets lib=&lib kill;
+run;
+quit;
+libname &lib clear;
+
+
+%mend;

viya/mv_getjobcode.sas

@@ -114,10 +114,10 @@ run;
 %let fname3=%mf_getuniquefileref();
 %let fpath1=%sysfunc(pathname(&fname1));
 %let fpath2=%sysfunc(pathname(&fname2));
-%let fpath3=%sysfunc(pathname(&fname2));
+%let fpath3=%sysfunc(pathname(&fname3));
 
 /* compile the lua JSON module */
-%ml_json() 
+%ml_json()
 /* read using LUA - this allows the code to be of any length */
 data _null_;
   file "&fpath3..lua";
@@ -147,4 +147,5 @@ data _null_;
 run;
 filename &fname1 clear;
 filename &fname2 clear;
+filename &fname3 clear;
 %mend;

viya/mv_getjoblog.sas

@@ -0,0 +1,267 @@
+/**
+  @file
+  @brief Extract the log from a completed SAS Viya Job
+  @details Extracts log from a Viya job and writes it out to a fileref
+
+  To query the job, you need the URI.  Sample code for achieving this
+  is provided below.
+
+  ## Example
+
+  First, compile the macros:
+
+      filename mc url "https://raw.githubusercontent.com/sasjs/core/main/all.sas";
+      %inc mc;
+
+  Next, create a job (in this case, a web service):
+
+      filename ft15f001 temp;
+      parmcards4;
+        data ;
+          rand=ranuni(0)*1000;
+          do x=1 to rand;
+            y=rand*4;
+            output;
+          end;
+        run;
+        proc sort data=&syslast
+          by descending y;
+        run;
+      ;;;;
+      %mv_createwebservice(path=/Public/temp,name=demo)
+
+  Execute it:
+
+      %mv_jobexecute(path=/Public/temp
+        ,name=demo
+        ,outds=work.info
+      )
+
+  Wait for it to finish, and grab the uri:
+
+      data _null_;
+        set work.info;
+        if method='GET' and rel='self';
+        call symputx('uri',uri);
+      run;
+
+  Finally, fetch the log:
+
+      %mv_getjoblog(uri=&uri,outref=mylog)
+
+  This macro is used by the mv_jobwaitfor macro, which is generally a more
+  convenient way to wait for the job to finish before fetching the log.
+
+
+  @param [in] access_token_var= The global macro variable to contain the access token
+  @param [in] mdebug= set to 1 to enable DEBUG messages
+  @param [in] grant_type= valid values:
+    @li password
+    @li authorization_code
+    @li detect - will check if access_token exists, if not will use sas_services if
+        a SASStudioV session else authorization_code.  Default option.
+    @li sas_services - will use oauth_bearer=sas_services.
+  @param [in] uri= The uri of the running job for which to fetch the status,
+    in the format `/jobExecution/jobs/$UUID/state` (unquoted).
+  @param [out] outref= The output fileref to which to APPEND the log (is always
+  appended).
+
+
+  @version VIYA V.03.04
+  @author Allan Bowe, source: https://github.com/sasjs/core
+
+  <h4> SAS Macros </h4>
+  @li mp_abort.sas
+  @li mf_getplatform.sas
+  @li mf_existfileref.sas
+  @li ml_json.sas
+
+**/
+
+%macro mv_getjoblog(uri=0,outref=0
+    ,contextName=SAS Job Execution compute context
+    ,access_token_var=ACCESS_TOKEN
+    ,grant_type=sas_services
+    ,mdebug=0
+  );
+%local oauth_bearer;
+%if &grant_type=detect %then %do;
+  %if %symexist(&access_token_var) %then %let grant_type=authorization_code;
+  %else %let grant_type=sas_services;
+%end;
+%if &grant_type=sas_services %then %do;
+    %let oauth_bearer=oauth_bearer=sas_services;
+    %let &access_token_var=;
+%end;
+%put &sysmacroname: grant_type=&grant_type;
+%mp_abort(iftrue=(&grant_type ne authorization_code and &grant_type ne password
+    and &grant_type ne sas_services
+  )
+  ,mac=&sysmacroname
+  ,msg=%str(Invalid value for grant_type: &grant_type)
+)
+
+/* validation in datastep for better character safety */
+%local errmsg errflg;
+data _null_;
+  uri=symget('uri');
+  if length(uri)<12 then do;
+    call symputx('errflg',1);
+    call symputx('errmsg',"URI is invalid (too short) - '&uri'",'l');
+  end;
+  if scan(uri,-1)='state' or scan(uri,1) ne 'jobExecution' then do;
+    call symputx('errflg',1);
+    call symputx('errmsg',
+      "URI should be in format /jobExecution/jobs/$$$$UUID$$$$"
+      !!" but is actually like: &uri",'l');
+  end;
+run;
+
+%mp_abort(iftrue=(&errflg=1)
+  ,mac=&sysmacroname
+  ,msg=%str(&errmsg)
+)
+
+%mp_abort(iftrue=(&outref=0)
+  ,mac=&sysmacroname
+  ,msg=%str(Output fileref should be provided)
+)
+
+%if %mf_existfileref(&outref) ne 1 %then %do;
+  filename &outref temp;
+%end;
+
+options noquotelenmax;
+%local base_uri; /* location of rest apis */
+%let base_uri=%mf_getplatform(VIYARESTAPI);
+
+/* prepare request*/
+%local  fname1;
+%let fname1=%mf_getuniquefileref();
+proc http method='GET' out=&fname1 &oauth_bearer
+  url="&base_uri&uri";
+  headers
+  %if &grant_type=authorization_code %then %do;
+          "Authorization"="Bearer &&&access_token_var"
+  %end;
+  ;
+run;
+%if &SYS_PROCHTTP_STATUS_CODE ne 200 and &SYS_PROCHTTP_STATUS_CODE ne 201 %then
+%do;
+  data _null_;infile &fname1;input;putlog _infile_;run;
+  %mp_abort(mac=&sysmacroname
+    ,msg=%str(&SYS_PROCHTTP_STATUS_CODE &SYS_PROCHTTP_STATUS_PHRASE)
+  )
+%end;
+%local  fname2 fname3 fpath1 fpath2 fpath3;
+%let fname2=%mf_getuniquefileref();
+%let fname3=%mf_getuniquefileref();
+%let fpath1=%sysfunc(pathname(&fname1));
+%let fpath2=%sysfunc(pathname(&fname2));
+%let fpath3=%sysfunc(pathname(&fname3));
+
+/* compile the lua JSON module */
+%ml_json()
+/* read using LUA - this allows the code to be of any length */
+data _null_;
+  file "&fpath3..lua";
+  put '
+    infile = io.open (sas.symget("fpath1"), "r")
+    outfile = io.open (sas.symget("fpath2"), "w")
+    io.input(infile)
+    local resp=json.decode(io.read())
+    local logloc=resp["logLocation"]
+    outfile:write(logloc)
+    io.close(infile)
+    io.close(outfile)
+   ';
+run;
+%inc "&fpath3..lua";
+/* get log path*/
+%let errflg=1;
+%let errmsg=No entry in &fname2 fileref;
+data _null_;
+  infile &fname2;
+  input;
+  uri=_infile_;
+  if length(uri)<12 then do;
+    call symputx('errflg',1);
+    call symputx('errmsg',"URI is invalid (too short) - '&uri'",'l');
+  end;
+  if scan(uri,1) ne 'files' or scan(uri,2) ne 'files' then do;
+    call symputx('errflg',1);
+    call symputx('errmsg',
+      "URI should be in format /files/files/$$$$UUID$$$$"
+      !!" but is actually like: &uri",'l');
+  end;
+  call symputx('errflg',0,'l');
+  call symputx('logloc',uri,'l');
+run;
+
+%mp_abort(iftrue=(&errflg=1)
+  ,mac=&sysmacroname
+  ,msg=%str(&errmsg)
+)
+
+/* we have a log uri - now fetch the log */
+proc http method='GET' out=&fname1 &oauth_bearer
+  url="&base_uri&logloc/content";
+  headers
+  %if &grant_type=authorization_code %then %do;
+          "Authorization"="Bearer &&&access_token_var"
+  %end;
+  ;
+run;
+%if &SYS_PROCHTTP_STATUS_CODE ne 200 and &SYS_PROCHTTP_STATUS_CODE ne 201 %then
+%do;
+  data _null_;infile &fname1;input;putlog _infile_;run;
+  %mp_abort(mac=&sysmacroname
+    ,msg=%str(logfetch: &SYS_PROCHTTP_STATUS_CODE &SYS_PROCHTTP_STATUS_PHRASE)
+  )
+%end;
+
+data _null_;
+  file "&fpath3..lua";
+  put '
+    infile = io.open (sas.symget("fpath1"), "r")
+    outfile = io.open (sas.symget("fpath2"), "w")
+    io.input(infile)
+    local resp=json.decode(io.read())
+    for i, v in pairs(resp["items"]) do
+	    outfile:write(v.line,"\n")
+    end
+    io.close(infile)
+    io.close(outfile)
+  ';
+run;
+%inc "&fpath3..lua";
+
+/* write log out to the specified fileref */
+data _null_;
+  infile &fname2 end=last;
+  file &outref mod;
+  if _n_=1 then do;
+    put "/** SASJS Viya Job Log Extract start: &uri **/";
+  end;
+  input;
+  put _infile_;
+  %if &mdebug=0 %then %do;
+    putlog _infile_;
+  %end;
+  if last then do;
+    put "/** SASJS Viya Job Log Extract end: &uri **/";
+  end;
+run;
+
+%if &mdebug=0 %then %do;
+  filename &fname1 clear;
+  filename &fname2 clear;
+  filename &fname3 clear;
+%end;
+%else %do;
+  %put _local_;
+%end;
+%mend;
+
+
+

viya/mv_jobflow.sas

@@ -9,21 +9,30 @@
 
   ## Input table (minimum variables needed)
 
-      | variable| description   |
-      |---|---|---|
-      |FLOW_ID| Numeric value, provides sequential ordering capability|
-      |_CONTEXTNAME|Dictates which context should be used to run the job. If
-       blank, will default to `SAS Job Execution compute context`.|
-      |_PROGRAM|Provides the path to the job itself|
+  @li FLOW_ID - Numeric value, provides sequential ordering capability
+  @li _CONTEXTNAME - Dictates which context should be used to run the job. If
+    blank, will default to `SAS Job Execution compute context`.
+  @li _PROGRAM - Provides the path to the job itself
+
+  Any additional variables provided in this table are converted into macro
+  variables and passed into the relevant job.
+
+  | FLOW_ID| _CONTEXTNAME   |_PROGRAM|
+  |---|---|---|
+  |0|SAS Job Execution compute context|/Public/jobs/somejob1|
+  |0|SAS Job Execution compute context|/Public/jobs/somejob2|
 
   ## Output table (minimum variables produced)
 
-      | variable| description   |
-      |---|---|---|
-      |FLOW_ID| Numeric value, provides sequential ordering capability|
-      |_CONTEXTNAME|Dictates which context should be used to run the job. If
-       blank, will default to `SAS Job Execution compute context`.|
-      |_PROGRAM|Provides the path to the job itself|
+  @li _PROGRAM - the SAS Drive path of the job
+  @li URI - the URI of the executed job
+  @li STATE - the completed state of the job
+  @li TIMESTAMP - the datetime that the job completed
+  @li JOBPARAMS - the parameters that were passed to the job
+  @li FLOW_ID - the id of the flow in which the job was executed
+
+  ![https://i.imgur.com/nZE9PvT.png](https://i.imgur.com/nZE9PvT.png)
+
 
   ## Example
 

viya/mv_jobwaitfor.sas

@@ -72,7 +72,7 @@
     should be in a `_program` variable.
   @param [out] outds= The output dataset containing the list of states by job
     (default=work.mv_jobexecute)
-
+  @param [out] outref= A fileref to which the spawned job logs should be appended.
 
   @version VIYA V.03.04
   @author Allan Bowe, source: https://github.com/sasjs/core
@@ -83,6 +83,7 @@
   @li mf_getuniquefileref.sas
   @li mf_existvar.sas
   @li mf_nobs.sas
+  @li mv_getjoblog.sas
 
 **/
 
@@ -91,6 +92,7 @@
     ,grant_type=sas_services
     ,inds=0
     ,outds=work.mv_jobwaitfor
+    ,outref=0
   );
 %local oauth_bearer;
 %if &grant_type=detect %then %do;
@@ -134,7 +136,7 @@ options noquotelenmax;
 data _null_;
   length jobparams $32767;
   set &inds end=last;
-  call symputx(cats('joburi',_n_),uri,'l');
+  call symputx(cats('joburi',_n_),substr(uri,1,55)!!'/state','l');
   call symputx(cats('jobname',_n_),_program,'l');
   call symputx(cats('jobparams',_n_),jobparams,'l');
   if last then call symputx('uricnt',_n_,'l');
@@ -178,14 +180,20 @@ run;
     run;
 
     %if &status=completed or &status=failed or &status=canceled %then %do;
+      %local plainuri;
+      %let plainuri=%substr(&&joburi&i,1,55);
       proc sql;
       insert into &outds set
         _program="&&jobname&i",
-        uri="&&joburi&i",
+        uri="&plainuri",
         state="&status",
         timestamp=datetime(),
         jobparams=symget("jobparams&i");
       %let joburi&i=0; /* do not re-check */
+      /* fetch log */
+      %if %str(&outref) ne 0 %then %do;
+        %mv_getjoblog(uri=&plainuri,outref=&outref)
+      %end;
     %end;
     %else %if &status=idle or &status=pending or &status=running %then %do;
       data _null_;